<source id="65mqz"><u id="65mqz"></u></source>

<menuitem id="65mqz"><strong id="65mqz"><thead id="65mqz"></thead></strong></menuitem><menuitem id="65mqz"><dfn id="65mqz"></dfn></menuitem><bdo id="65mqz"></bdo>

  • <tbody id="65mqz"></tbody>
  • <tbody id="65mqz"></tbody>
        1. <track id="65mqz"></track>

          Contact

          Characteristics and Functions of Duct Production Line

          The duct production linemainly refers to the entire process of air duct forming. Generally speaking, one single machine is able to complete different products.


          It can be seen that in the duct production line, a fully automatic producing line can greatly reduce the use of labor. At the same time, the raw materials must be tightly pressed in each production section so that the materials can reduce the generation of waste. The cutting function can cut off the raw materials to facilitate the next step. It can make the whole process more efficient and faster.


          Theduct production lineis a high-quality, high-efficiency, low-cost production line, and the equipment is relatively small and is easy to move. It can adapt to high-efficiency production as well as mass production. The production line mainly consists of electric double disc feeding, feeding flat press, shearing corner, shearing machine, moving clamp machine, double-link flange machine, bending machine. Different parts of the production line have different functions.


          Features and functions of duct production line:

          1. Electric double disc rack

          It is mainly to complete the feeding functions of automatic feeding, material return and point movement, and has a good protection effect on the surface of the sheet metal.


          2. Sheet leveling

          The feeding roller-shaped plastic bag ensures the anti-slip of the sheet in order to avoid the damage to the appearance of the sheet. That is because the material selection of the embossing roller has an important effect on the arc and angle of the sheet.


          3. Adjustment part

          The shearing angle section is flat pressed on the tail and can be adjusted freely according to the width of the metal plate. When you use a power hydraulic system, if you want to get a different shearing angle, you will just need to change the mold.


          4. Clipboard part

          Mainly used for cutting when changing materials.


          5. Bite machine

          The main purpose is to ensure the size of the plate. When the predetermined length is reached, the mobile bite machine will automatically cut off and return to a series of actions to achieve the bite function.


          6. Double machine connecting rod automatic folding machine

          The double machine connecting rod is composed of four rollers. When the plate enters the roller, the plate is formed.


          7. The curved part

          When the plate moves to a predetermined length, the bending part automatically carries out

          the bending movement of the plate.

          Related News
          <source id="65mqz"><u id="65mqz"></u></source>

          <menuitem id="65mqz"><strong id="65mqz"><thead id="65mqz"></thead></strong></menuitem><menuitem id="65mqz"><dfn id="65mqz"></dfn></menuitem><bdo id="65mqz"></bdo>

        2. <tbody id="65mqz"></tbody>
        3. <tbody id="65mqz"></tbody>
              1. <track id="65mqz"></track>

                ai换脸杨幂,迪丽热巴,抖阴短视频ios版,国产真实伦对白全集,亚亚洲人成图片一,看看屋官方在线观看,影音先锋中文字幕亚洲资源站