<source id="65mqz"><u id="65mqz"></u></source>

<menuitem id="65mqz"><strong id="65mqz"><thead id="65mqz"></thead></strong></menuitem><menuitem id="65mqz"><dfn id="65mqz"></dfn></menuitem><bdo id="65mqz"></bdo>

  • <tbody id="65mqz"></tbody>
  • <tbody id="65mqz"></tbody>
        1. <track id="65mqz"></track>

          Contact

          Safety Operation Rules Of Steel Sheet Cutting Machine

          1. Wear labor protection articles before work and keep your coat closed.

          2. The operator must be familiar with the structure, performance, and usage of the steel sheet cutting machine.

          3. All electrical facilities and fuel tank potential must be checked before starting up, and the operation can only be carried out after it is determined to be in good condition.

          4. After starting the motor, the emergency stop button of the machine must be in good condition, and the operation can be officially started after it is confirmed in good condition.

          5. Confirm plate thickness before cutting, and then adjust blade clearance on the right side of the machine tool, and lock after adjustment.

          6. Adjust the machining size as required, press the calculator button (long press is required and stop after reaching the value) for the machine tool's rear gear adjustment, and then use tape to check and adjust the size.

          7. The machine shall make 1-3 idle runnings before the operation, and then carry out the cutting work after normal operation.

          8. When cutting the plate, in order to ensure the right angle of the workpiece, the workpiece should be pressed close to the left side of the machine tool to block, and then the cutting board and processing button (foot pedal switch) shall be started.

          9. During the operation and processing of the hydraulic steel sheet cutting machine, the hand shall support the workpiece. It is strictly prohibited to extend the hand into the guardrail (blade shearing bar).

          10. During processing, one must concentrate on his work and refrain from playing and talking to each other.

          11. When two or more operators operate, the main operator should check the situation of the cooperators before starting, and inform them to start the switch (foot pedal) after ensuring no danger.

          12. In case of the abnormal situation of the machine during the process, the power supply shall be cut off immediately and the machine shall be stopped for inspection.

          13. Power must be cut off when adjusting the machine tool, and hand safety should be ensured when moving the workpiece.

          14. The power should be cut off after work, and the machine tool maintenance and environmental cleaning should be done well.
          Related News
          • Brief Introduction of Stainless Steel Hole Punching Machine

            Brief Introduction of Stainless Steel Hole Punching Machine

            July 25, 2019Stainless steel hole punching machine is mainly used in automatic equipment for processing holes on stainless steel, anti-theft net, aluminium alloy and other materials. It can realize automatic punch...view
          • Explanation of the Basic Knowledge of the Riveting Machine

            Explanation of the Basic Knowledge of the Riveting Machine

            July 30, 2018Today, we will introduce some basic knowledge of the riveting machine. Riveting is the work of connecting two parts with rivets. The shearing force produced by the nail rod and nail cap prevents the s...view
          • Duct CNC Plasma Cutting Machine from China Blkma

            Duct CNC Plasma Cutting Machine from China Blkma

            April 18, 2018BLKMA specializes in the production of desktop CNC plasma cutting machine,which is mainly used for cutting blanks of special-shaped parts in pipeline processing. The machining mode adopted by the machine ...view
          • How to Control the Stability of Riveting Machine

            How to Control the Stability of Riveting Machine

            June 27, 2019Riveting machine is a new type of riveting equipment developed on the basis of cold rolling principle. It refers to the mechanical equipment which can rivet objects with rivets. Riveter equipment has ...view
          • How does the Auto Duct Line Work?

            How does the Auto Duct Line Work?

            July 30, 2018One tool that almost every factory uses now is the auto duct line, and all kinds of auto duct line work methodically. Are there any difficulties in the technology of auto duct line? Let's take a quick...view
          • Advantages of Hand Folding Machine

            Advantages of Hand Folding Machine

            July 30, 2018Hand folding machine is a combination of the advantages of various hand folding machines, its greatest advantage is that it has a movable, divisible upper mold, and can be adjusted according to the di...view
          <source id="65mqz"><u id="65mqz"></u></source>

          <menuitem id="65mqz"><strong id="65mqz"><thead id="65mqz"></thead></strong></menuitem><menuitem id="65mqz"><dfn id="65mqz"></dfn></menuitem><bdo id="65mqz"></bdo>

        2. <tbody id="65mqz"></tbody>
        3. <tbody id="65mqz"></tbody>
              1. <track id="65mqz"></track>

                ai换脸杨幂,迪丽热巴,抖阴短视频ios版,国产真实伦对白全集,亚亚洲人成图片一,看看屋官方在线观看,影音先锋中文字幕亚洲资源站